Benrus Wrist Alarm c.1966
Benrus Wrist Alarm c.1966
The mid-to-late ‘60s Benrus Wrist Alarms were about as nice of a design as you’ll find. A classic Benrus dial configuration, uniquely styled dauphine hands, a frontloading monocase design with no caseback (reduces moisture entry in the watch), and a nicely sized 34+mm size…
A real standard in American brand alarm watches that have stood the test of time as well as any!
Movement: Benrus DS1D (AS 1475 base), 17 jewels, 18,000 bph
Case: Signed 20 micron gold electroplate bezel, stainless steel back - monocase design
Powered: Mechanical - Handwind
Case Width: 34.4 mm (35.4mm incl. crowns)
Case Length: 41 mm
Lug Width: 18 mm
Thickness: 12mm
Crystal: Domed acrylic
Crown: Original, non-screw down, dual signed crowns
Band: New double-stitched field style leather band
Boxes: None
Function - This watch is wound manually. It is recommended to wind the crown 10-15 times to typically give an initial power reserve to last throughout the day. Avoid overwinding the watch once it feels tight. To wind the alarm, rotate the top crown clockwise like you would normally, then pull the crown out and rotate counter-clockwise until the alarm hand points at the desired alarm time.
[All vintage watches are expected to function as described. However, due to age and generally unknown service history (unless otherwise stated), these watches may not keep time as accurately as new or quartz (battery) watches. This is completely normal and does not indicate that there is a major problem. Like your automobile, all mechanical watches will likely need to be serviced at some point in time. Please keep this in mind, as there is no guarantee regarding when these vintage watches may need standard maintenance. Every watch sold by Buying On Time is done so with the expectation that it is not currently in need of service or repair, unless noted. We guarantee that all watches sold are accurately described and in the stated condition when they leave our hands.]